| Input | |
| Voltage range | 12-24 VDC |
| No-load standby | 50 Hz |
| Max effect input current | < 0,3 W |
| Output | |
| Output voltage |
Same as input
|
| Max. output effect |
144 W @ 24 VDC, 72 W @ 12 VDC
|
| Min. required load | 0 W |
| Dimming method |
Pulse width modulation (PWM)
|
| Radio receiver | |
| Operating frequence | 2,4…2,483 Ghz |
| Maximal output effect | 4 dBm |
| Working conditions | |
| Surroundings temperature, ta | -20…+45°C |
| Max. enclosure temperature, tc | 75°C |
| Storage temperature | -25…+75°C |
| Max. relative humidity |
0…80%, non-cond.
|
| Connections | |
|
Cable cross sectional area (single and multi-core)
|
0,75 – 1,5 mm2, 14 – 22 AWG
|
| Cable scaling length | 6 – 7 mm |
| Tightening torque | 0,4 Nm |
| Mechanical data | |
| Dimensions |
72,6x 30,0 x 18,0 mm
|
| Weight | 23 g |
| Protection |
IP20 (for indoor use only)
|
Snurra mig!
Color dimmer PWM4WCM
PWM4WCM is a color dimmer that can control up to four channels – perfect for RGBW and Tunable White (TW) applications. PWM4WCM is connected to a drive/power supply. The maximum combined output current is 6A which can be freely distributed between 1-4 channels. RGBW is used effectively on facades when darkness falls, or as a mood setter in restaurants or hotels.
For constant voltage for LED stripes and LED modules with constant voltage for 12-24Vdc. PWM4WCM can handle 144W/24Vdc and 72W/12Vdc. PWM4WCM has protection against overheating, transients and short circuits.
Description
Change the device function:
To change a device’s function, you need to disconnect it from the network. Then you can go to “More” and when it appears in “Devices nearby” you click on it and choose to change profile.
Dimming of four channels
Dim 1-4 channels separately. Enter the connected network, double-click the device. Click on “Change the condition of the luminaire” to regulate each of the channels separately. To dim between 1-4 channels, use profile 4xDIM.
Tunable-White (TW):
Tunable-White (TW) works by several controllable channels adjusting the color temperature of the light source and the radiant white light gets a different tone. To adjust whiteness, use profile with TW in the name.
Color adjustment
Set the color exactly as you want it. Enter the connected network, double-click the device. Click on “Change the condition of the luminaire” to regulate light level, whiteness, color and color saturation. To adjust the color, use profiles with RGBW in the name.
Alternative control methods
The unit can be controlled via external pushbuttons. It can be controlled both by pushbuttons connected to actuators/dimmers with Bluetooth support or directly via pushbuttons with Bluetooth. First make sure that the desired pushbutton is connected to the same network as the device you want to control. PWM dimmer for 12-24Vdc, 4 separate channels (RGB).
