| Designation |
LDN200KRON
|
| Art.number | V-40PO200-101N |
| E-number | 13 607 71 |
| Output power | 0-100VA/Output |
| Voltage | 220-240V |
| Standby power | <0.2W |
| Max current | 0,45A/Output |
| Frequency | 50Hz |
| Light regulation | Can be controlled by one or more retractive switches |
| Soft start | Yes |
| Memories last settings | Yes, even after power outage |
| Overheating protection | Yes, automatic reset after removal of error |
| Short-circuit protection | Yes, automatic reset after removal of error |
| Mounting | Built-in device box |
| Operating humidity | 0…80%, non-cond |
| Operating temperature | -20 +40°C |
| Size LxWxH | 48,1×46,2×18,5mm |
| Weight | 39g |
| Cable area | 1,0-2,5mm2 (AWG 12-22) |
| Enclosure material | Polycarbonat (PC) |
| Area of usage |
230V LED lamps, electronic transformers, LED ballasts, incandescent lamps and 230V halogen lamps. Do not forget to take the reactive power into account when calculating the load. |
| Dimming | 0% – 100% |
| Insulation class | IP20 |
| Enclosure class | II |
| Approval | CE |
| Function | Trailing edge dimming |
Snurra mig!
LED dimmer without neutral LDN200KRON
LDN200KRON does not require a neutral connection and is therefore optimal for installations where there is no neutral in the device box or it’s hard to reach within the installation environment.
LDN200KRON has two dimmable outputs of 0-100VA per channel controlled by the respective push button input. Each output can be individually adjusted for boost, max & min by setting the potentiometers. These potentiometers can be set even without voltage, which allows “mass programming” of several dimmers if you know what load is expected and you have tested before.
The dimmer has a memory function that remembers the last used light level on switching on/off. This also applies when the dimmer has been without power.
LDN200KRON is used for LED, 230V halogen and electronic transformers.
