Cable dimmer CD50 White

CD50 is a Swedish-designed cable dimmer with double-pole switching. The dimmer is installed directly on the cable to the load and provides dimming options for e.g., table lamps, floor lamps and window lamps. The dimming is done via knobs with clicks for on and off.

Adapted for LED, 230V halogen, incandescent, dimmable LED drivers and electronic transformers up to 50W (cos φ = 1).

E13 606 24

SKU: V-40V0050-031Y Category: Rotary dimmers

Label	CD50 White
Item number	V-40V0050-032
E-number	13 606 25
Power	1-50W (cos φ =1)
Voltage	220-240V
Switching type	Double-pole
Input current	0.22A
Function	Rotary trailing edge dimming
On/Off	Dial click
Operating temperature	-20°C to +40°C
Tc max	43°C
Color	Matt white (RAL 9016)
Casing material	PC
Connection	Screw-based terminal block (max. 2.5 mm²)
Transient protection	Yes, 2kV
Overload protection	Yes, automatic reset
Overheating protection	Yes, 115°C automatic reset
Short-circuit protection	Yes, automatic reset
Soft start	No
Working humidity	<90% RH non-condensing
Casing classification	IP20
Dimming	0% – 100%
Insulation classification	IP20
Manufacturing standards	EN 61058-2-1: 2011, EN 61058-1: 2019, EN 55015: 2013+A1:2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 61058-2-1:2010
Certifications	CE

Description

Adjustment of maximum dimmer level/flicker
Maximum dimming load for loads that need extra adjustment. Used for loads when flicker occurs in the maximum dimmed position. Can also be used for fine adjustment of the highest dimmer level. Procedure: Dimming the load to maximum light. For flicker, turn the potentiometer clockwise with a screwdriver to reduce the amount of flicker. Keep turning until you reach the dimmer level you want and no flicker occurs. When fine-tuning, turn the potentiometer clockwise with a screwdriver and stop just before the light starts to dim. Keep turning until you reach the dimming level you want.

Fine adjustment of the minimum dimmer level
For the most common loads. Procedure: Dim the load to minimal brightness. Turn the potentiometer clockwise with a screwdriver to set the minimum dimmer level. Keep turning until you reach the dimmer level you want and no flicker occurs.